The same 98 mm cast steel burr set and the same grind quality as the EK43, in a shorter body built for counters where height is tight.
The choice when you want the EK43's range under a low shelf or in a compact bar layout. Smaller hopper as standard, with the full size available as an option.
Specifications
| Burrs |
Flat, 98 mm cast steel, vertically mounted |
| Burr speed (idle) |
1,760 rpm at 60 Hz |
| Burr life |
approx. 6,000 kg at median setting |
| Hopper capacity |
approx. 250 g. Optional 1,200 g hopper |
| Output |
19 to 21 g/sec. Turkish fine 10 to 12 g/sec |
| Electrical (US) |
100-120 V, 60 Hz, single phase, 1,300 W |
| Dimensions (W x H x D) |
9.1 x 26.8 x 16.1 in (23 x 68 x 41 cm) |
| Weight |
54 lbs (24.5 kg) |
| Noise |
60 dB idle, 87 dB grinding |
| Duty cycle |
40 min maximum grinding, then a cooling period |
| Standards |
IEC/EN 60335-1, IEC/EN 60335-2-64, ANSI/UL 763, CSA-C22.2 No. 195 |
| Certifications |
CE, CB, ETL Safety, ETL Sanitation |
Bag holder included, and compatible with stainless dosing cups.
Specialist burr sets are available for Turkish fine, linseed, poppy seed, grain and spice, each with the appropriate pre-breaker.
Mahlkönig publishes no NSF/ANSI 8 standard number for the EK line, only ETL Sanitation. If NSF certification is a requirement for your site, tell us and we will confirm with the factory before you order.
Call 877-88-DOLCE (36523) or send us the details.
